{"product_id":"maker-modus-3-8-compression-cnc-router-bit-10-pack","title":"Maker Modus 3\/8\" Compression CNC Router Bit 10-Pack, 2 Flute Solid Carbide, 3\/8\" Shank, 1-1\/4\" Cut","description":"\u003cp\u003eA compression bit cuts in two directions at once. The short up-cut section at the tip pulls chips up and keeps the bottom face of the sheet clean. The down-cut flutes above it push the top face down. Together they leave clean edges on both faces of plywood and other sheet goods.\u003c\/p\u003e\n\u003cp\u003eThis 10-pack has ten Maker Modus 3\/8\" compression bits in the factory carton. That works out to about $60 per bit, compared with $74.99 for a single bit.\u003c\/p\u003e\n\u003cp\u003eEach bit has a 3\/8\" cutting diameter, a 3\/8\" shank and 2 flutes. The cutting length is 1-1\/4\", with a 3\/16\" up-cut section at the tip and a 30° helix angle. It's made from solid carbide with our DuraKeen™ coating, a special coating made to extend edge life, and is built for woodworking on a CNC router.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompression (up-cut tip, down-cut above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShank diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUp-cut section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/16\" at the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlutes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHelix angle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDuraKeen™ coating, made to extend edge life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFactory carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eThese are the typical jobs for a compression bit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlywood and Baltic birch\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eMelamine and other laminated panels\u003c\/li\u003e\n\u003cli\u003eCabinet and furniture parts cut from sheet goods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTip for clean edges\u003c\/h3\u003e\n\u003cp\u003eSet your cut depth deeper than the 3\/16\" up-cut section so the down-cut flutes reach the top face. If the cut stays inside the up-cut zone, only the up-cut flutes touch the top face and you lose the compression effect there.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eTen Maker Modus 3\/8\" compression CNC router bits in the factory carton.\u003c\/p\u003e\n\u003cp\u003eNeed just one? The \u003ca href=\"\/products\/maker-modus-3-8-compression-cnc-router-bit-2-flute\"\u003esingle 3\/8\" compression bit\u003c\/a\u003e is also available.\u003c\/p\u003e\n","brand":"Maker Modus","offers":[{"title":"Default Title","offer_id":68004039491796,"sku":"MM-CNC-COMP-38-10PK","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/9128\/4948\/files\/maker-modus-3-8-compression-bit-10-pack-01-main.png?v=1792788368","url":"https:\/\/makermodus.com\/products\/maker-modus-3-8-compression-cnc-router-bit-10-pack","provider":"Maker Modus","version":"1.0","type":"link"}